Fully Automatic Four-Wire Combined Terminal Crimping Machine ZOKO-038H
| Model: | ZOKO-038H |
|---|---|
| Brand: | KingXoul |
| Function: | Wire Cut, Strip & Crimp; Automatic 4 wires into one Terminal Crimping ; |
Fully Automatic Four-Wire Combined Terminal Crimping Machine | ZOKO-038H
(Wire Harness Processing Equipment)
Boost your wire harness production efficiency with the ZOKO-038H Fully Automatic Four-Wire Combined Terminal Crimping Machine. This high-performance automatic multi-wire terminal machine simultaneously processes four wires (AWG24–AWG16), cutting and stripping them with precision, then jointly crimping one end of all four wires onto a single terminal while individually crimping terminals on the opposite ends—delivering a total of five terminals in one seamless cycle.
Ideal for automotive, electronics, appliance, and industrial wire harness manufacturing, the ZOKO-038H combines wire cutting, stripping, and five-end terminal crimping in a fully automated workflow. One side performs four-wire combined (joint) crimping into one terminal; the other side applies individual terminals (same or different types) to each wire. Enjoy high accuracy, stable 2-ton quiet crimping force, and reliable long-wire handling for maximum productivity.
Key Features & Benefits
-
- Fully automatic processing of four wires at once
- One-side four-wire combined/joint terminal crimping + individual terminals on the other ends (5 terminals total)
- Precise cutting, stripping, and crimping in a single cycle
- Wide wire range and long cutting length support
- Ultra-quiet 2-ton cast clutch crimping unit for consistent quality
- Compact footprint with optional long-wire conveyor for lengths over 800 mm
Technical Specifications
|
Parameter
|
Specification
|
|---|---|
|
Model
|
ZOKO-038H
|
|
Function
|
Four-wire one-end combined (joint) crimping onto one terminal + individual terminals on four wires (5 terminals total)
|
|
Applicable Wire Size
|
AWG24# – AWG16#
|
|
Cutting Length
|
65 – 9999 mm (long-wire conveyor required above 800 mm)
|
|
Power Supply
|
AC 220V 50/60Hz 20A
|
|
Cutting Accuracy
|
Within 0.5 mm + cutting length × 0.5%
|
|
Crimping Capacity
|
Standard 2 TON (cast ultra-quiet clutch 2.0T terminal machine)
|
|
Machine Dimensions
|
L1450 × W750 × H1860 mm
|
Upgrade your production line with this reliable automatic four-wire joint terminal crimping machine. Contact us today for a quote, demo video, or customized configuration to meet your specific wire harness requirements.
Fully Automatic Housing Insertion and Terminal Crimping Machine working video:
|
Parameter
|
Specification
|
|---|---|
|
Model
|
ZOKO-038H
|
|
Function
|
Four-wire one-end combined (joint) crimping onto one terminal + individual terminals on four wires (5 terminals total)
|
|
Applicable Wire Size
|
AWG24# – AWG16#
|
|
Cutting Length
|
65 – 9999 mm (long-wire conveyor required above 800 mm)
|
|
Power Supply
|
AC 220V 50/60Hz 20A
|
|
Cutting Accuracy
|
Within 0.5 mm + cutting length × 0.5%
|
|
Crimping Capacity
|
Standard 2 TON (cast ultra-quiet clutch 2.0T terminal machine)
|
|
Machine Dimensions
|
L1450 × W750 × H1860 mm
|
| xx model 1 | xx model 2 | xx model 3 | |
|---|---|---|---|
| Cutting to length: | |||
| Full stripping: | |||
| Half stripping: | |||
| Multi-step stripping: | |||
| Center stripping / Intermediate slitting: |
|||
| Multi-conductor cable processing: | |||
| Core processing: | |||
| Double sheath cable processing: | |||
| Flat cable processing: | |||
| Cutting pulled strands / Precision cut: |
|||
| Hot stamp marking: | |||
| Inkjet marking: | |||
| Coiling / Binding | |||
| Sequence processing | |||
| Wire feed (Roller/Belt) | |||
| Wire deposit system | |||
| Pulling / Dereeling prefeeder | |||
| Batch separation | |||
| Twisting / Tinning | |||
| Seal insertion | |||
| Split cycle for closed barrels | |||
| Double crimping | |||
| Sleeve insertion | |||
| Double sheath / Coaxial and triaxial cables |
|||
| Ferrule crimping | |||
| MIL crimping | |||
