Automatic Two Wires into One Terminal Crimping Machine sample Wire ZOKO-038
| Model: | ZOKO-038 |
|---|---|
| Brand: | KingXoul |
| Function: | Wire Cut, Strip & Crimp; Automatic 2 wires into one Terminal Crimping ; |
Automatic Two Wires into One Terminal Crimping Machine – ZOKO-038
(Wire Harness Processing Equipment)
Looking for a high-efficiency solution for dual-wire harness production? The Automatic Two Wires into One Terminal Crimping Machine ZOKO-038 is a fully automatic wire processing machine designed to cut, strip, and crimp two wires simultaneously. Its standout feature is the ability to combine (joint-crimp) one end of two wires into a single terminal while independently processing the opposite ends of each wire. Ideal for automotive, electronics, home appliance, and wire harness manufacturers seeking higher productivity and consistent quality.
This dual-wire combination terminal crimping machine delivers stable performance, precise control, and easy operation, making it a reliable choice for mass production of two-wire assemblies.
Key Capabilities
-
Fully automatic cutting, stripping, and terminal crimping for two wires.
-
One-end joint crimping: presses both wires into the same terminal.
-
Independent processing of the free ends of Wire A and Wire B.
-
High production efficiency with consistent accuracy
-
Compact design and user-friendly touch-screen operation
Technical Specifications
|
Parameter
|
Specification
|
|---|---|
|
Model
|
ZOKO-038
|
|
Capacity
|
2500 pcs/hour (within 300 mm length)
|
|
Function
|
Completes joint crimping of one end of two wires onto the same terminal
|
|
Applicable Wire Range
|
AWG24# – AWG16#
|
|
Cutting Length
|
65 – 9999 mm (conveyor belt required for lengths over 800 mm)
|
|
Power Supply
|
AC220V 50/60Hz 20A
|
|
Cutting Accuracy
|
Within 0.5 mm + cutting length × 0.5%
|
|
Crimping Force
|
Standard 2 TON (cast iron ultra-quiet clutch 2.0T terminal machine)
|
|
Machine Dimensions
|
L1000 × W750 × H1860 mm
|
Upgrade your wire harness production line with the Automatic Two Wires into One Terminal Crimping Machine ZOKO-038 — the efficient dual-wire joint terminal solution for modern manufacturing.
Fully Automatic Housing Insertion and Terminal Crimping Machine working video:
|
Parameter
|
Specification
|
|---|---|
|
Model
|
ZOKO-038
|
|
Capacity
|
2500 pcs/hour (within 300 mm length)
|
|
Function
|
Completes joint crimping of one end of two wires onto the same terminal
|
|
Applicable Wire Range
|
AWG24# – AWG16#
|
|
Cutting Length
|
65 – 9999 mm (conveyor belt required for lengths over 800 mm)
|
|
Power Supply
|
AC220V 50/60Hz 20A
|
|
Cutting Accuracy
|
Within 0.5 mm + cutting length × 0.5%
|
|
Crimping Force
|
Standard 2 TON (cast iron ultra-quiet clutch 2.0T terminal machine)
|
|
Machine Dimensions
|
L1000 × W750 × H1860 mm
|
| xx model 1 | xx model 2 | xx model 3 | |
|---|---|---|---|
| Cutting to length: | |||
| Full stripping: | |||
| Half stripping: | |||
| Multi-step stripping: | |||
| Center stripping / Intermediate slitting: |
|||
| Multi-conductor cable processing: | |||
| Core processing: | |||
| Double sheath cable processing: | |||
| Flat cable processing: | |||
| Cutting pulled strands / Precision cut: |
|||
| Hot stamp marking: | |||
| Inkjet marking: | |||
| Coiling / Binding | |||
| Sequence processing | |||
| Wire feed (Roller/Belt) | |||
| Wire deposit system | |||
| Pulling / Dereeling prefeeder | |||
| Batch separation | |||
| Twisting / Tinning | |||
| Seal insertion | |||
| Split cycle for closed barrels | |||
| Double crimping | |||
| Sleeve insertion | |||
| Double sheath / Coaxial and triaxial cables |
|||
| Ferrule crimping | |||
| MIL crimping | |||
