EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine
| Model: | EVT-691 |
|---|---|
| Brand: | KingXoul |
| Function: | Wire Cut, Strip & Crimp; Housing / Socket/ Connector Insertion; Twisting & Tinning . |
Multi-Wire Series Comparison
Choose the right model based on the number of wires you need to process simultaneously.
EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine
Model: EVT-691 (Wire Harness Processing Equipment)
The EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine is a high-efficiency wire harness processing solution designed for modern electronics, automotive, and appliance manufacturing. This advanced automatic terminal machine performs wire cutting, dual-end stripping, double-end terminal crimping, and single-end housing (plastic shell/connector) insertion in one continuous cycle. It delivers finished wire harnesses with one end terminated and inserted into a connector housing while the other end is fully crimped, significantly reducing labor and improving production consistency.
Ideal for high-volume production of precision wire harnesses, the EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine supports wire lengths from 100 mm to 1000 mm and processes AWG 20# to AWG 30# wires with excellent stability and accuracy.
Key Features of the EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine
- Fully automatic process: wire feeding, cutting, dual-side stripping, double-end terminal crimping, and single-end housing insertion
- Flexible wire length range of 100–1000 mm (minimum 115 mm for cross assembly)
- Compatible with fine wires from AWG 20# to AWG 30#
- High-precision linear motor wire feeding system for stable and accurate length control
- Three 1.5T servo crimping stations equipped with Solow pressure monitoring (one single-channel + one dual-channel system)
- Supports sequential and cross assembly modes (stores up to 4 wires)
- Vibratory bowl feeder for automatic housing supply
- Comprehensive quality detection: crimping force monitoring, insertion position detection, missing terminal detection, and missing wire detection
- Six symmetric work stations for smooth and efficient operation
- High positioning accuracy with four clamps controlled by stepper motors on both sides
- Compact yet robust design suitable for continuous industrial use
This Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine is an excellent choice for manufacturers seeking to upgrade from semi-automatic or multi-machine processes to a single high-productivity terminal and housing insertion solution.
Technical Parameters – EVT-691 Fully Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine
|
Parameter
|
Specification
|
|---|---|
|
Model
|
EVT-691
|
|
Machine Dimensions & Weight
|
2900 mm (W) × 1550 mm (D), approx. 1200 kg
|
|
Applicable Wire Size
|
AWG #30 – #20
|
|
Wire Feeding Method
|
Linear motor pull-type feeding
|
|
Wire Processing Length
|
100 – 1000 mm (minimum 115 mm for cross assembly)
|
|
Stripping Length
|
Side 1: 1.0 – 16 mm; Side 2: 1.0 – 16 mm
|
|
Crimping Capacity
|
3 × 1.5T (equipped with Solow pressure system: one single-channel + one dual-channel)
|
|
Applicable Terminals
|
40 mm stroke European-style molds
|
|
Applicable Housing Size
|
Max. 58 mm (W) × 20 mm (D) × 15 mm (H)
|
|
Production Capacity
|
2.8 sec/pcs (when cut length ≤ 300 mm)
|
|
Stripping Method
|
Forward and reverse screw
|
|
Transport Method
|
Stepper motor control on both sides, 4 high-precision clamps
|
|
Assembly Method
|
Sequential assembly / Cross assembly (stores up to 4 wires)
|
|
Quality Detection Functions
|
Pressure monitoring, assembly position detection, missing terminal detection, missing wire detection, etc.
|
|
Housing Feeding Method
|
Vibratory bowl feeder
|
|
Operating Stations
|
6 stations (symmetric layout)
|
|
Air Pressure Requirement
|
Clean compressed air 0.5 – 0.7 MPa
|
|
Power Supply
|
220V / 50 Hz
|
Automatic Both Ends Terminal Crimping and One End Housing Insertion Machine | EVT-691 Demo
Fully automatic both ends terminal crimping and one end housing insertion machine.
The EVT-691 performs wire cutting, dual-end stripping, double-end terminal crimping
and single-end housing insertion in one continuous process. Ideal for AWG 20-30
wire harness production with high precision and efficiency.
|
Parameter
|
Specification
|
|---|---|
|
Model
|
EVT-706B
|
|
Machine Dimensions (W×D×H)
|
2700 × 1700 × 2100 mm
|
|
Machine Weight
|
Approx. 1300 kg
|
|
Applicable Wire Size
|
AWG#16 – #24
|
|
Wire Feeding Method
|
Linear motor wire pulling system
|
|
Wire Processing Length
|
250 – 3500 mm
|
|
Stripping Length
|
Both ends: 1.0 – 10 mm
|
|
Crimping Force
|
1.5 Ton × 2 units (can crimp 2 different terminals)
|
|
Applicable Terminals
|
JAM-type side-feed terminals (compatible with JST, Molex after changing punch and base plate)
|
|
Applicable Housing Size
|
Max. 58W × 20D × 15H mm (up to 2 different housing types)
|
|
Production Capacity
|
3.5 sec/piece (at 300 mm wire length)
|
|
Stripping Method
|
Forward and reverse lead screw
|
|
Transfer System
|
Servo motor driven trolleys (3 sets of clamps) with high positioning accuracy
|
|
Assembly Method
|
Sequential assembly or cross assembly (selectable within available space)
|
|
Quality Detection Functions
|
Blade copper-wire contact alarm, end-face visual inspection, terminal visual inspection, pressure monitoring, assembly-in-place monitoring
|
|
Housing Feeding Method
|
Vibratory bowl feeder
|
|
Working Stations
|
6 stations + 3 trolley units
|
|
Air Pressure Requirement
|
0.5 – 0.7 MPa (dry and clean compressed air)
|
|
Power Supply
|
220V
|
|
Wire Pay-off Axes
|
8 axes
|
