Fully Automatic 12 Wire Crimping, Housing Insertion,Twisting and Tinning Machine | EVT-712
| Model: | EVT-704 |
|---|---|
| Brand: | KingXoul |
| Function: | Multi-Wire Cut, Strip & Crimp; Housing / Socket/ Connector Insertion; Twisting & Tinning . |
Multi-Wire Series Comparison
Choose the right model based on the number of wires you need to process simultaneously.
EVT-712 Fully Automatic 12 Wire Crimping, Housing Insertion, Twisting and Tinning Machine
Model: EVT-712 (Wire Harness Processing Equipment)
The EVT-712 Fully Automatic 12 Wire Crimping, Housing Insertion, Twisting and Tinning Machine is a high-capacity multi-wire processing solution designed for complex wire harness production. It features a 12-axis wire feeder that can simultaneously handle up to 12 different color wires.
One end of the wire performs terminal crimping and housing/connector insertion, while the opposite end completes precise twisting and tinning. The machine supports ultra-short wire lengths starting from 25–30 mm with minimum stripping and twisting of only 2 mm, and can process lengths up to 1000 mm (or 3000 mm with the pulling feeding method for higher length accuracy).
Ideal for high-mix, multi-color short-wire applications, the EVT-712 delivers excellent productivity and consistent quality for electronics and consumer wire harness manufacturing.
Key Functions of the EVT-704 Fully Automatic Multi-Wire Terminal Crimping Housing Insertion Twisting Tinning Machine
- 12-Wire Simultaneous Feeding – Equipped with 12-axis wire feeder (4 more guide rails than EVT-708), supporting up to 12 different color wires in one cycle.
- Ultra-Short Wire Capability – Can produce 12-group different color products as short as 25–30 mm, with minimum stripping & twisting length of only 2 mm.
- Flexible Length Range – Processes wires from 40 mm to 1000 mm (up to 3000 mm with pulling feeding method for higher length accuracy).
- Single-End Tinning + Housing Insertion – One end performs terminal crimping and housing insertion; the other end completes twisting and tinning.
- High-Precision Servo System – 1.5T servo terminal machine + servo trolley transfer for accurate positioning.
- Comprehensive Quality Inspection – Blade touch copper wire detection, copper core end-face vision, terminal appearance vision, presence detection, assembly confirmation, stripping check, wire presence, and low air pressure detection.
- Efficient Assembly – Sequential assembly mode with five working stations + one trolley set.
Technical Specifications of EVT-712 Fully Automatic Multi-Wire Terminal Crimping Housing Insertion Twisting Tinning Machine
|
Parameter
|
Specification
|
|---|---|
|
Model
|
EVT-712
|
|
Footprint Dimensions & Weight
|
2300 mm × 700 mm, approx. 650 kg
|
|
Applicable Wire Size
|
AWG #18–#22 or AWG #24–#28
|
|
Terminal Feeding Method
|
Vibratory bowl feeder
|
|
Wire Feeding Method
|
Pulling feeding
|
|
Stripping Method
|
Forward & reverse lead screw
|
|
Stripping Length
|
Side 1: 1.0–8 mm; Side 2: 1.0–15 mm
|
|
Crimping Capacity
|
1.5T servo terminal machine
|
|
Applicable Terminals
|
JAM, OPT, JST, Molex side-feed terminals (JST & Molex require replacement of lock mold base plate and punch)
|
|
Production Capacity
|
Twisting + Tinning: 2.7 sec/piece (when cut length ≤ 50 mm)
|
|
Transfer Method
|
Servo motor trolley operation
|
|
Assembly Method
|
Sequential assembly
|
|
Wire Processing Length
|
40–1000 mm (long wires require conveyor belt; up to 3000 mm with pulling method)
|
|
Housing Dimensions
|
≤ 58 W × 20 D × 15 H mm
|
|
Quality Inspection Functions
|
Blade touch copper wire detection, copper core end-face visual inspection, terminal appearance visual inspection, terminal presence detection, assembly position detection, stripping port detection, wire presence detection, low air pressure detection, etc.
|
|
Working Stations
|
Five stations + one set of trolley
|
|
Air Pressure Requirement
|
0.5–0.7 MPa
|
|
Power Supply
|
220 V
|
|
Wire Feeder Axes
|
12 axes
|
6. Production Efficiency Table
|
Cut Length (mm)
|
Cycle Time
|
Pieces/Hour (Single Wire)
|
Holes
|
Efficiency/Hour
|
|---|---|---|---|---|
|
40–50
|
2.6 S
|
1384
|
4
|
340
|
|
50–300
|
2.7 S
|
1300
|
4
|
330
|
|
300–700
|
2.9 S
|
1240
|
4
|
310
|
|
700–1000
|
3.4 S
|
1050
|
4
|
260
|
|
1200–1500
|
4.0 S
|
900
|
4
|
225
|
|
1500–2100
|
4.7 S
|
766
|
4
|
191
|
|
2100–3000
|
5.5 S
|
655
|
4
|
164
|
Applicable Product: EVT-712 Fully Automatic Single-End Tinning & Housing Insertion Terminal Machine
Fully Automatic Multi-Wire Terminal Crimping Housing Insertion Twisting Tinning Machine | EVT-704 working video:
|
Parameter
|
Specification
|
|---|---|
|
Model
|
EVT-704
|
|
Footprint Dimensions & Weight
|
2300 mm × 700 mm, approx. 650 kg
|
|
Applicable Wire Size
|
AWG #18–#22 or AWG #24–#28
|
|
Terminal Feeding Method
|
Vibratory bowl feeder
|
|
Wire Feeding Method
|
Wheel feeding
|
|
Stripping Method
|
Forward & reverse lead screw
|
|
Stripping Length
|
Side 1: 1.0–8 mm; Side 2: 1.0–10 mm
|
|
Crimping Capacity
|
1.5T servo terminal machine
|
|
Applicable Terminals
|
JAM, OPT, JST, Molex side-feed terminals (JST & Molex require replacement of lock mold base plate and punch)
|
|
Production Capacity
|
Twisting + Tinning: 2.6 sec/piece (when cut length ≤ 50 mm)
|
|
Transfer Method
|
Servo motor trolley operation (2 trolley clamps), high positioning accuracy
|
|
Assembly Method
|
Sequential assembly / Cross assembly
|
|
Wire Processing Length
|
30–1000 mm (long wires require conveyor belt)
|
|
Housing Dimensions
|
≤ 58 W × 20 D × 15 H mm
|
|
Quality Inspection Functions
|
Copper core end-face visual inspection, terminal appearance visual inspection, terminal presence detection, assembly position detection, stripping port detection, wire presence detection, low air pressure detection, etc.
|
|
Working Stations
|
Six stations + two sets of trolleys
|
|
Air Pressure Requirement
|
0.5–0.7 MPa
|
|
Power Supply
|
220 V
|
|
Wire Feeder Axes
|
4 axes
|
